{"id":1337,"date":"2022-11-08T15:42:14","date_gmt":"2022-11-08T02:42:14","guid":{"rendered":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/?p=1337"},"modified":"2022-11-08T15:42:15","modified_gmt":"2022-11-08T02:42:15","slug":"just-print-a-part-an-innovative-solution-to-a-staining-challenge","status":"publish","type":"post","link":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/2022\/11\/08\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\/","title":{"rendered":"\u201cJust print a part\u201d: An innovative solution to a staining challenge"},"content":{"rendered":"\n<p>Henry Ford is quoted as saying<em> \u201cDon&#8217;t find fault, find a remedy\u201d<\/em>, and being able to securely place larger sized tissue slides in the automated slide stainer at Taranaki\u2019s laboratory, has led Ben Hunter and Gareth Ashton to find the remedy.<\/p>\n\n\n\n<p>This issue became apparent after the laboratory\u2019s equipment was upgraded. The arrival of a new automated slide stainer meant larger slides could not be securely fitted into the racks and the team had to find a solution.<\/p>\n\n\n\n<p>\u201cUnfortunately, the new stainer didn\u2019t come with a slide rack which suited what we needed,\u201d explains Gareth, the laboratory\u2019s Anatomical Pathology Head of Department.&nbsp;\u201cWe had asked for ideas from our histology colleagues and came up with a modified rack for the larger slides. However, it was quite tricky to place them properly, they could fall out during the staining run, and we could only stain four slides in a run. The alternative is to stain by hand, which isn\u2019t practical due to the potential number of slides and the variation of staining, brought about by this process.\u201d<\/p>\n\n\n\n<p>Gareth says sourcing the specific type of racks they needed from overseas was both difficult and expensive.<\/p>\n\n\n\n<p>In Henry Ford\u2019s words, &#8220;<em>what\u2019s the remedy?&#8221;<\/em> &#8211; in this case a 3D printed prototype insert, designed by Ben, which easily fits into a staining rack allowing for up to eight large slides to be stained in each run.<\/p>\n\n\n\n<p>\u201cBen was interested in 3D printing and talked with me about using his printer to fabricate the insert. Our Laboratory Manager Sally Scouller and I agreed, and with our support he did the whole thing from scratch. There were a couple of early versions before he came up with the insert we have now. It is fully functional, easy for us to use and allows for good, standardised staining of the slides.\u201d<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"708\" src=\"https:\/\/fl-healthscope-media.s3.amazonaws.com\/lab-sites\/uploads\/sites\/6\/2022\/11\/TPS-3D-printing-1024x708.jpg\" alt=\"\" class=\"wp-image-1333\" srcset=\"https:\/\/fl-healthscope-media.s3.amazonaws.com\/lab-sites\/uploads\/sites\/6\/2022\/11\/TPS-3D-printing-1024x708.jpg 1024w, https:\/\/fl-healthscope-media.s3.amazonaws.com\/lab-sites\/uploads\/sites\/6\/2022\/11\/TPS-3D-printing-300x207.jpg 300w, https:\/\/fl-healthscope-media.s3.amazonaws.com\/lab-sites\/uploads\/sites\/6\/2022\/11\/TPS-3D-printing-768x531.jpg 768w, https:\/\/fl-healthscope-media.s3.amazonaws.com\/lab-sites\/uploads\/sites\/6\/2022\/11\/TPS-3D-printing.jpg 1380w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><figcaption>Gareth Ashton (left) and Ben Hunter (right) with the new 3D printed slide holder.<\/figcaption><\/figure>\n<\/div>\n\n\n<p>The new insert is currently being used at our Taranaki laboratory and is working well. Gareth says it could be modified to use with other types of slide racks and is cost effective to replace, especially compared with alternatives from overseas.<\/p>\n\n\n\n<p>\u201cWe had previously cobbled together large slide staining racks for past stainers using bits and bobs from around the lab and home. However, 3D printing allowed me to design a rack which was customised and fit for purpose, and we could do the build ourselves. With only being able to run four slides at a time, we asked how can we do this better, and through a bit of Kiwi ingenuity we found a solution\u201d says Histology Technician Ben.&nbsp; <\/p>\n\n\n\n<p>\u201cThere is potential for the insert to be used in other labs. We are only limited by our imagination, and it has been fantastic to be able to use technology to lift something up to a better level and find what works. This technology allows for many different solutions for problems both big and small.&nbsp; From modifications like this one, to racks for commonly used tools (which can be attached onto analysers), to elevating feet which raise equipment to a desired height, says Gareth.<\/p>\n\n\n\n<p>\u201cPurpose built items used to be under the domain of specialised businesses with expensive equipment.&nbsp; But now there are many backyard enthusiasts who can create fantastic solutions.&nbsp; You never know who is hiding in your department, who has the ability to enhance your workplace in many different ways.\u201d<\/p>\n","protected":false},"excerpt":{"rendered":"Henry Ford is quoted as saying \u201cDon&#8217;t find fault, find a remedy\u201d, and being able to securely place larger sized tissue slides in the automated slide stainer at Taranaki\u2019s laboratory, has led Ben Hunter and Gareth Ashton to find the remedy. This issue became apparent after the laboratory\u2019s equipment was upgraded. The arrival of a [&hellip;]","protected":false},"author":18,"featured_media":1333,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[7],"tags":[],"class_list":["post-1337","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v27.5 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>\u201cJust print a part\u201d: An innovative solution to a staining challenge &#8211; News &#8211; Awanui Labs - Taranaki<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/2022\/11\/08\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"\u201cJust print a part\u201d: An innovative solution to a staining challenge &#8211; News &#8211; Awanui Labs - Taranaki\" \/>\n<meta property=\"og:description\" content=\"Henry Ford is quoted as saying \u201cDon&#8217;t find fault, find a remedy\u201d, and being able to securely place larger sized tissue slides in the automated slide stainer at Taranaki\u2019s laboratory, has led Ben Hunter and Gareth Ashton to find the remedy. This issue became apparent after the laboratory\u2019s equipment was upgraded. The arrival of a [&hellip;]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/2022\/11\/08\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\/\" \/>\n<meta property=\"og:site_name\" content=\"Awanui Labs - Taranaki\" \/>\n<meta property=\"article:published_time\" content=\"2022-11-08T02:42:14+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2022-11-08T02:42:15+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/fl-healthscope-media.s3.amazonaws.com\/lab-sites\/uploads\/sites\/6\/2022\/11\/TPS-3D-printing.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1380\" \/>\n\t<meta property=\"og:image:height\" content=\"954\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Karen\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Karen\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"3 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/2022\\\/11\\\/08\\\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/2022\\\/11\\\/08\\\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\\\/\"},\"author\":{\"name\":\"Karen\",\"@id\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/#\\\/schema\\\/person\\\/cb8bf8c03c078ad98cd51052841d7a06\"},\"headline\":\"\u201cJust print a part\u201d: An innovative solution to a staining challenge\",\"datePublished\":\"2022-11-08T02:42:14+00:00\",\"dateModified\":\"2022-11-08T02:42:15+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/2022\\\/11\\\/08\\\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\\\/\"},\"wordCount\":594,\"publisher\":{\"@id\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/2022\\\/11\\\/08\\\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/fl-healthscope-media.s3.amazonaws.com\\\/lab-sites\\\/uploads\\\/sites\\\/6\\\/2022\\\/11\\\/TPS-3D-printing.jpg\",\"articleSection\":[\"News\"],\"inLanguage\":\"en-NZ\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/2022\\\/11\\\/08\\\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\\\/\",\"url\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/2022\\\/11\\\/08\\\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\\\/\",\"name\":\"\u201cJust print a part\u201d: An innovative solution to a staining challenge &#8211; News &#8211; Awanui Labs - Taranaki\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/2022\\\/11\\\/08\\\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/2022\\\/11\\\/08\\\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/fl-healthscope-media.s3.amazonaws.com\\\/lab-sites\\\/uploads\\\/sites\\\/6\\\/2022\\\/11\\\/TPS-3D-printing.jpg\",\"datePublished\":\"2022-11-08T02:42:14+00:00\",\"dateModified\":\"2022-11-08T02:42:15+00:00\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/2022\\\/11\\\/08\\\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\\\/#breadcrumb\"},\"inLanguage\":\"en-NZ\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/2022\\\/11\\\/08\\\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-NZ\",\"@id\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/2022\\\/11\\\/08\\\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\\\/#primaryimage\",\"url\":\"https:\\\/\\\/fl-healthscope-media.s3.amazonaws.com\\\/lab-sites\\\/uploads\\\/sites\\\/6\\\/2022\\\/11\\\/TPS-3D-printing.jpg\",\"contentUrl\":\"https:\\\/\\\/fl-healthscope-media.s3.amazonaws.com\\\/lab-sites\\\/uploads\\\/sites\\\/6\\\/2022\\\/11\\\/TPS-3D-printing.jpg\",\"width\":1380,\"height\":954},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/2022\\\/11\\\/08\\\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"\u201cJust print a part\u201d: An innovative solution to a staining challenge\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/#website\",\"url\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/\",\"name\":\"Awanui Labs - Taranaki\",\"description\":\"Laboratory and pathology services\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-NZ\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/#organization\",\"name\":\"Awanui Labs - Taranaki\",\"url\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-NZ\",\"@id\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/fl-healthscope-media.s3.amazonaws.com\\\/lab-sites\\\/uploads\\\/sites\\\/6\\\/2023\\\/09\\\/RGB_Awanui-Labs-horizonal-colour-positive.svg\",\"contentUrl\":\"https:\\\/\\\/fl-healthscope-media.s3.amazonaws.com\\\/lab-sites\\\/uploads\\\/sites\\\/6\\\/2023\\\/09\\\/RGB_Awanui-Labs-horizonal-colour-positive.svg\",\"width\":861,\"height\":133,\"caption\":\"Awanui Labs - Taranaki\"},\"image\":{\"@id\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/#\\\/schema\\\/person\\\/cb8bf8c03c078ad98cd51052841d7a06\",\"name\":\"Karen\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-NZ\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/ff8a81c293b52bfa62efae5a3c850835486fc56969fcdb76e01225132c6881b9?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/ff8a81c293b52bfa62efae5a3c850835486fc56969fcdb76e01225132c6881b9?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/ff8a81c293b52bfa62efae5a3c850835486fc56969fcdb76e01225132c6881b9?s=96&d=mm&r=g\",\"caption\":\"Karen\"},\"url\":\"https:\\\/\\\/www.awanuilabs.co.nz\\\/central\\\/taranaki\\\/author\\\/kcooper\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"\u201cJust print a part\u201d: An innovative solution to a staining challenge &#8211; News &#8211; Awanui Labs - Taranaki","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/2022\/11\/08\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\/","og_locale":"en_US","og_type":"article","og_title":"\u201cJust print a part\u201d: An innovative solution to a staining challenge &#8211; News &#8211; Awanui Labs - Taranaki","og_description":"Henry Ford is quoted as saying \u201cDon&#8217;t find fault, find a remedy\u201d, and being able to securely place larger sized tissue slides in the automated slide stainer at Taranaki\u2019s laboratory, has led Ben Hunter and Gareth Ashton to find the remedy. This issue became apparent after the laboratory\u2019s equipment was upgraded. The arrival of a [&hellip;]","og_url":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/2022\/11\/08\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\/","og_site_name":"Awanui Labs - Taranaki","article_published_time":"2022-11-08T02:42:14+00:00","article_modified_time":"2022-11-08T02:42:15+00:00","og_image":[{"width":1380,"height":954,"url":"https:\/\/fl-healthscope-media.s3.amazonaws.com\/lab-sites\/uploads\/sites\/6\/2022\/11\/TPS-3D-printing.jpg","type":"image\/jpeg"}],"author":"Karen","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Karen","Est. reading time":"3 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/2022\/11\/08\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\/#article","isPartOf":{"@id":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/2022\/11\/08\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\/"},"author":{"name":"Karen","@id":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/#\/schema\/person\/cb8bf8c03c078ad98cd51052841d7a06"},"headline":"\u201cJust print a part\u201d: An innovative solution to a staining challenge","datePublished":"2022-11-08T02:42:14+00:00","dateModified":"2022-11-08T02:42:15+00:00","mainEntityOfPage":{"@id":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/2022\/11\/08\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\/"},"wordCount":594,"publisher":{"@id":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/#organization"},"image":{"@id":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/2022\/11\/08\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\/#primaryimage"},"thumbnailUrl":"https:\/\/fl-healthscope-media.s3.amazonaws.com\/lab-sites\/uploads\/sites\/6\/2022\/11\/TPS-3D-printing.jpg","articleSection":["News"],"inLanguage":"en-NZ"},{"@type":"WebPage","@id":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/2022\/11\/08\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\/","url":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/2022\/11\/08\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\/","name":"\u201cJust print a part\u201d: An innovative solution to a staining challenge &#8211; News &#8211; Awanui Labs - Taranaki","isPartOf":{"@id":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/2022\/11\/08\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\/#primaryimage"},"image":{"@id":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/2022\/11\/08\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\/#primaryimage"},"thumbnailUrl":"https:\/\/fl-healthscope-media.s3.amazonaws.com\/lab-sites\/uploads\/sites\/6\/2022\/11\/TPS-3D-printing.jpg","datePublished":"2022-11-08T02:42:14+00:00","dateModified":"2022-11-08T02:42:15+00:00","breadcrumb":{"@id":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/2022\/11\/08\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\/#breadcrumb"},"inLanguage":"en-NZ","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/2022\/11\/08\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\/"]}]},{"@type":"ImageObject","inLanguage":"en-NZ","@id":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/2022\/11\/08\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\/#primaryimage","url":"https:\/\/fl-healthscope-media.s3.amazonaws.com\/lab-sites\/uploads\/sites\/6\/2022\/11\/TPS-3D-printing.jpg","contentUrl":"https:\/\/fl-healthscope-media.s3.amazonaws.com\/lab-sites\/uploads\/sites\/6\/2022\/11\/TPS-3D-printing.jpg","width":1380,"height":954},{"@type":"BreadcrumbList","@id":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/2022\/11\/08\/just-print-a-part-an-innovative-solution-to-a-staining-challenge\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/"},{"@type":"ListItem","position":2,"name":"\u201cJust print a part\u201d: An innovative solution to a staining challenge"}]},{"@type":"WebSite","@id":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/#website","url":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/","name":"Awanui Labs - Taranaki","description":"Laboratory and pathology services","publisher":{"@id":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-NZ"},{"@type":"Organization","@id":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/#organization","name":"Awanui Labs - Taranaki","url":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/","logo":{"@type":"ImageObject","inLanguage":"en-NZ","@id":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/#\/schema\/logo\/image\/","url":"https:\/\/fl-healthscope-media.s3.amazonaws.com\/lab-sites\/uploads\/sites\/6\/2023\/09\/RGB_Awanui-Labs-horizonal-colour-positive.svg","contentUrl":"https:\/\/fl-healthscope-media.s3.amazonaws.com\/lab-sites\/uploads\/sites\/6\/2023\/09\/RGB_Awanui-Labs-horizonal-colour-positive.svg","width":861,"height":133,"caption":"Awanui Labs - Taranaki"},"image":{"@id":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/#\/schema\/person\/cb8bf8c03c078ad98cd51052841d7a06","name":"Karen","image":{"@type":"ImageObject","inLanguage":"en-NZ","@id":"https:\/\/secure.gravatar.com\/avatar\/ff8a81c293b52bfa62efae5a3c850835486fc56969fcdb76e01225132c6881b9?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/ff8a81c293b52bfa62efae5a3c850835486fc56969fcdb76e01225132c6881b9?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/ff8a81c293b52bfa62efae5a3c850835486fc56969fcdb76e01225132c6881b9?s=96&d=mm&r=g","caption":"Karen"},"url":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/author\/kcooper\/"}]}},"featured_image_src":"https:\/\/fl-healthscope-media.s3.amazonaws.com\/lab-sites\/uploads\/sites\/6\/2022\/11\/TPS-3D-printing-600x400.jpg","featured_image_src_square":"https:\/\/fl-healthscope-media.s3.amazonaws.com\/lab-sites\/uploads\/sites\/6\/2022\/11\/TPS-3D-printing-600x600.jpg","author_info":{"display_name":"Karen","author_link":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/author\/kcooper\/"},"_links":{"self":[{"href":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/wp-json\/wp\/v2\/posts\/1337","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/wp-json\/wp\/v2\/users\/18"}],"replies":[{"embeddable":true,"href":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/wp-json\/wp\/v2\/comments?post=1337"}],"version-history":[{"count":5,"href":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/wp-json\/wp\/v2\/posts\/1337\/revisions"}],"predecessor-version":[{"id":1342,"href":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/wp-json\/wp\/v2\/posts\/1337\/revisions\/1342"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/wp-json\/wp\/v2\/media\/1333"}],"wp:attachment":[{"href":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/wp-json\/wp\/v2\/media?parent=1337"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/wp-json\/wp\/v2\/categories?post=1337"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.awanuilabs.co.nz\/central\/taranaki\/wp-json\/wp\/v2\/tags?post=1337"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}